The maintenance of this equipment is simple, the client usually tells us when the display shows a message service (very common in English market brands or registration SERVICE BE), these intervals of service once the service call will be reset, but not the total hours of operation that will guide us to use is giving the stove by the customer.
An important issue is the regulation of the parameters involved in our experience so if we turn off the stove will give more speed to our bi worm (known as the cochlea) or we turn up the fan speed in our case we also have some kick to increase the speed exhaust fan fumes.
My experience has shown that good regulation is one that can work the oven at low power with minimal consumption of pellet and not off, another little trick is that if this what we have achieved in the control parameters of different powers will also make the correction how?, as a proportion as if a regular PID any air conditioning equipment, another tip if you permit me before changing parameters is pointed to the parameters of the stove.
Normally these computers do not usually occur when there are too many problems and tend to be setup but over time we can find faults in the circuit board or on wear resistance, these problems are easy to detect because it appears to us in the display indicating the problem with our stove.
is recommended to advise the client to use good materials for the installation of camera equipment such as pipe flanges and end, never use metal band in the case of not having flanges is advisable to approach a store and purchase not leave the band to later replace something that never happens because workarounds workarounds become final.
I hope I have helped but I think the best expert I explained all my little secrets, I hope that this information is useful for your work.
Also in the case of installing a stove, I recommend acquiring a distributor or manufacturer has a service to which access or use in the event of a malfunction, that you avoid many headaches and not look bad with the client. I
with ARTEL biomass products had a great commitment, commitment to our customers (installers) and now from technical and commercial part I valued very much.
If you want to contact you enclose my email:
alberto@aricclima.com
0 comments:
Post a Comment